Water-Tite 100 is designed to seal leaks in running water where conventional mortars would be washed away. Ideal for use in patching concrete mortars, repairing concrete pipe and pre-cast concrete, repairing honeycombs, crack and spalls, anchoring of bolts and fixtures, repairing water retaining structures, and filling holes. How to Use: 1. For surface preparation, surfaces should be brushed clean to remove loose material, dust and laitance, 2. Area as to be patched should be cut back to a depth of 20mm and given a good mechanical key. Feather edges must not be allowed. 3. All surfaces must be damped with clean water prior to application. 4. Mixing proportion is 1 part water to 3 parts Water-Tite 100. 5. Apply mixed Water-Tite in place ensuring maximum contact with substrate. If being used to plug a running water leak, should be held in place until it reaches initial set time. 6. Due to rapid setting, use only the quantity which can